RB 3510 Series High Inner Ring Rotation Accuracy High Rigidity Thin-section Cross Roller Bearing For Robot

RB Series crossed roller bearing series (outer ring division type with inner rotating). This type is the primary type of crossed roller bearings. The outer rings have two parts, and the inner circle is one integer. The class is well applied to the situation requiring high rotation accuracy on the inner circle. For example, it is suitable for the rotary part of the indexing table of the tools machine. RB Series Cross Roller Bearings Features: 1. High precision: precision at P4, P5. 2. High rigidity: this series of bearings are with preload. 3. High load capacity: This bearing can support axial, radial, and tilting loads. 4. Small volume: this series of bearings can save space for the machine. Applications of RB Series Cross Roller Bearings: RB series crossed roller bearings are widely used in industrial robots, medical equipment, machining center turntables, precision turntables, indexing tables, radar, and other fields. Installation of RB Series Cross Roller bearing： 1. Before installation, clean the housing or other mounting parts to remove dirt and make sure that the burrs of the parts have been removed. 2. When inserted into the bearing seat or shaft, it is easy to tilt because it is a thin-walled bearing. Please use a plastic hammer to find out the level, strike evenly in the circumferential direction and insert a little bit until the contact surface can be confirmed by sound and completely tight.