Language
A drop-in replacement yoke for AP61 and AP63 hay and straw balers. Reference code 0930.23.03.00 / 12.56.100. Weighs 1.56 kg. Natural colour or oiled finish. Packed in carton or wooden box. This yoke is a wear-critical component in the baler knotter and pickup drive train, and the 12.56.100 replacement yoke restores the drive geometry without modification.
The 12.56.100 Yoke transmits motion through the baler's knotter and pickup drive system. On the AP61 and AP63 baler platforms, this yoke is a wear component: after several seasons of baling the yoke bore and the pin seat wear beyond tolerance, the drive loses timing, and the knotter starts missing ties or the pickup stops feeding cleanly. The 12.56.100 replacement yoke restores the original drive geometry without requiring any modification to the surrounding linkage.
A single replacement yoke, machined to original dimensional specification, with natural colour or oiled surface finish. Supplied in a carton, or in a wooden box for consolidated pallet shipments. The part matches the reference code 12.56.100 and cross-references to 0930.23.03.00. Compatible with the AP61 and AP63 baler series.
Direct replacement for the 12.56.100 yoke on AP61 hay and straw balers. Same bore, pin seat and mounting geometry as the original part. No reaming, welding or adapter plate required.
Direct replacement for the 12.56.100 yoke on AP63 hay and straw balers. Interchangeable with the reference code 0930.23.03.00 already used on some AP63 variants.
The yoke sits in the knotter and pickup drive train. Failure symptom on the baler is timing drift and missed ties rather than an obvious mechanical break. Replacing the yoke restores timing.
If the nameplate on your baler shows 0930.23.03.00 instead of 12.56.100, the two codes refer to the same yoke. Send a photo of the existing part and we will confirm before shipment.
The yoke runs continuously through the hay harvest when the baler operates at full duty. A worn yoke becomes visible here first as missed ties or uneven bale density.
Straw baling puts higher shock loads on the knotter drive train than hay. Replacing the yoke before the season reduces the risk of a mid-harvest breakdown.
Service shops replace the 12.56.100 yoke as part of pre-season baler preparation. The part is small enough to stock, and the replacement avoids unscheduled downtime during peak season.
Baler dealers stock the 12.56.100 as a fast-moving spare. Supplied in carton or wooden box, ready for shelf or warehouse storage.
Independent repair shops use the yoke as a replacement for the reference code 0930.23.03.00. Straightforward installation with common hand tools.
Raydafon supplies the 12.56.100 yoke to aftermarket distributors and OEM customers who need a reliable replacement for the baler yoke without paying original equipment prices.
Every 12.56.100 yoke is dimensionally inspected against the original specification before packing. The yoke bore, pin seat and mounting face are checked to confirm fit. Each shipment ships with a packing list and, on request, dimensional inspection records. Review our factory, inspection equipment and why customers choose us.
Yes. The 12.56.100 yoke is produced to match the original dimensional specification for AP61 and AP63 balers. The bore, pin seat and mounting geometry correspond to the reference code 12.56.100 / 0930.23.03.00. No modification to the baler linkage is required for installation.
Both reference codes identify the same yoke. If your baler nameplate, service manual or existing part shows either 12.56.100 or 0930.23.03.00, the Raydafon replacement will fit. Send us a photo of the existing yoke on the machine and the baler model plate if you want confirmation before ordering.
Each 12.56.100 yoke weighs 1.56 kg. The yoke is supplied in a carton for small orders, or in a wooden box for larger consolidated shipments and pallet loads. Custom packaging and shipping marks are available for OEM and distributor orders.
The first symptom is usually timing drift in the knotter drive: missed ties, incomplete knots, or bales that vary in density. As the yoke bore wears past tolerance, the pickup drive may also start slipping. Replacing the yoke restores the original timing and drive geometry.
MOQ depends on whether the yoke is ordered as a single part or as part of a consolidated baler spare parts order. Send us your required quantity and destination port and our sales team will confirm MOQ, unit price and production schedule in writing.
Yes. OEM and private-label production is available. We can apply your brand markings, custom carton printing and branded box labels. Share your branding requirement and we will confirm feasibility and any additional lead time.
Send us the baler model, the existing part photo and your destination port. We will reply with the correct yoke reference, unit price, MOQ and lead time.
Address
Luotuo Industrial Area, Zhenhai District, Ningbo City, China
Tel
