Model 650 3-Point Post Hole Digger with Optional Auger Combos for Fits All Category 1 Tractors

Model 650 3-Point Post Hole Digger with Optional Auger Combos for Fits All Category 1 TractorsProduct DescriptionModel 650 three-point pile hole excavator with optional auger combination, suitable for all Class 1 tractorsThe 650 three-point pile hole excavator is a powerful and efficient tool design......

Send Inquiry

Product Description

Model 650 3-Point Post Hole Digger with Optional Auger Combos for Fits All Category 1 Tractors

Product Description

Model 650 three-point pile hole excavator with optional auger combination, suitable for all Class 1 tractors

The 650 three-point pile hole excavator is a powerful and efficient tool designed to make pile hole excavation easier and faster. It is a heavy implement that can be connected to the three-point linkage of the tractor and can be used for various soil types, including rock and compacted soil. The 650 type three-point rear hole excavator uses a high-strength steel frame and gearbox to provide greater torque and power for the auger. It also has replaceable cutting edges and auger teeth to ensure lasting performance. The three-point pile digger can dig holes 48 inches deep and 12 inches in diameter, which is very suitable for various applications, such as setting fence piles or planting trees. The three-point rear drill also has adjustable cutting depth and inclined teeth to ensure accurate drilling. In general, the 650 three-point column hole excavator is a very good tool for anyone who needs to dig column holes quickly and efficiently. With its solid structure, powerful motor and multi-function design, it can help you complete the task in a short time.

650 three-point drill for sale This is a new high quality rear hole excavator suitable for Class 1 tractors. It is OEM quality and has been produced for decades. It proudly and reliably serves farmers, landscape professionals and owners. Compatible with 6 ", 9" and 12 "drilled augers bolted to the 2" gearbox shaft Includes everything you need to dig (except tractors!)! 1. Boom with high-strength 2-7/8 "oil pipe, with adjusting hole and manual tank 2. Power take-off (PTO) power transmission system, solid 1 series, with safety shield (1 3/8 "x 6 quick release x 1 1/4" round, with safety bolt) 3. Heavy right angle gear box 4. High-strength A-frame - 27.5 "lift arm spacing 5. Hardware kit with necessary pins and bolts 6. Products with or without augers can be purchased through the drop-down menu. If there is any combination you don't see and want to buy, please contact us. All augers in the drop-down list are 48 inches long. 7. If your tractor is a super compact tractor with CAT 1 3-pt hitch, and you need a 36 "auger, please purchase the variant without auger and purchase the compact auger you need separately. 8. The auger with diameter of 6-12 "is standard type with replaceable edge.

Model	Model 400 Compact	Model 650 Standard Duty	Model 1000 Heavy Duty	Model 1500 Extra Heavy Duty
SKU	24-0361	24-0362	24-0318	24-0337
Category	0 & 1	1	1	1 & 2
Boom Length	56"	60"	72"	72"
Tubing Diameter	2-7/8"	2-7/8"	2-7/8"	3-1/4"
Draw Pin Width	20"	27"	27"	32-1/2"
Drive ine	Series 1	Series 1	Series 4	Series 4
Gearbox	2.9:1	2.9:1	2.9:1	3.18:1
Auger Diameters	6", 9", 12" (3' lengths)	6", 9", 12"	6", 9", 12", 18", 24"	6", 9", 12", 18", 24"
Weight	150 bs	160 bs	200 bs	235 bs
SKU	24-0361	24-0362	24-0318	24-0337
Features	4 Positions	3 Positions	4 Positions	4 Positions

Part size of 650 three-point drill

Model # / CAT	A(in) Lower Hitch Point Spread -Max	B(in) Lower Hitch Point Spread -Min	C(in) Clevis/ Ball Joint Outside Width	D(in) Upper Hitch Point Pin Dia
Model 400 / CAT 0, Sub Compact	26-3/8	20-7/8	1.75	0.75
Model 650 / CAT 1	33-1/2	28	1-5/8	1.0
Model 1000 / CAT 1	32-3/8	26-7/8	1-5/16	0.75
Model 1500 / CAT 1 & 2	38-3/8	32-7/8	1-5/16	0.75

650 three-point drill parts

The three-point pile excavator usually consists of the following parts: Spiral bit: A sharp spiral blade that can be rotated to shovel up from the ground and remove soil. Gearbox: A mechanism that connects the input of the tractor power take-off (PTO shaft) to the output shaft of the rotary auger bit. Linkage: the linkage mechanism connecting the pile excavator to the three-point linkage system of the tractor, which is easy to operate and control.

Characteristics of 650 tractor three-point drilling excavator

The 650 tractor three-point pile hole excavator is a powerful and widely used digging tool designed to be installed on the tractor's three-point linkage. Some key features of the machine include: Three-point linkage device: The 650 three-point pile excavator is designed with a three-point linkage, which can be easily connected to and removed from the tractor. 6 ", 9" and 12 "augers: The 650 three-point column drill is equipped with three different sizes of augers, which can drill holes of various sizes according to your needs. Heavy gearbox: The gearbox of the 650 three-point pillar excavator is made of heavy materials to ensure its service life and durability. Powder coating finish: after drilling, the excavator adopts powder coating finish, which not only looks great, but also helps to prevent rust and other wear. Adjustable boom: The boom of 650 three-point backhole excavator can be adjusted to adapt to different drilling depths and angles. Power take-off (PTO) drive: The 650 three-point rear excavator is powered by the tractor's PTO sahft, which can provide sufficient power even for the most difficult drilling. Safety cover: 650 pile hole excavator is designed with safety cover to prevent injury caused by flying debris. In general, the 650 tractor 3-point drill is a reliable and efficient tool, which can save a lot of time and labor when digging holes for fencing, planting or construction. Its heavy structure, easy adjustment and compatibility with screw conveyors of different sizes make it very suitable for performing a series of excavation tasks in different terrain.

How do I store a three point hole digger? To store the three-point post excavator, the following steps should be followed: 1. Clean the pile excavator: use a brush or cloth to remove any dirt or debris on the excavator. This will prevent rust or corrosion. 2. Remove dirt from the auger blades: Use a scraper to remove dirt or mud from the auger blades. This will help prevent rust and ensure that the auger can be used the next time it is needed. 3. Lubricate the auger: lubricate the auger blades with light oil or silicone spray. This will help prevent rusting and ensure that the auger can turn easily when needed. 4. Fix the auger: use elastic belt or belt to fix the auger in the upright position. This can prevent it from falling and damaging. 5. Store in a dry place: store the pile excavator in a dry place, such as a garage or shed. This will prevent rusting and corrosion and protect it from adverse weather. By following these steps, you can ensure that your 3-point rear excavator is clean, lubricated and properly stored, so that it can be used at any time when needed.

Three-point drilling excavator for 650 tractor

The pile excavator system installed on the tractor includes boom, a-frame, transmission, PTO power train with safety shield, manual carbon canister and all necessary pins and bolts. All models have an adjustable boom/A-frame connection. After drilling, the excavator is installed in a separate Flat noodles. Depending on the model, you can also install a 9 inch or 12 inch auger and create an order.

Material available

Low carbon steel, C45, 20CrMnTi, 42CrMo, 40Cr, stainless steel. Can be adapted regarding customer requirements.

Surface treatment

Blacking, galvanization, chroming, electrophoresis, color painting, ...

Heat treatment

High frequency quenching heat treatment, hardened teeth, carbonizing, nitride, ...

Certifications

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

If you have another question, please feel free to contact us.

Packing & Delivery